#Foscam online viewer how to

What if your camera is mounted upside-down or its preview is tilted a bit? With IP Camera Viewer you can adjust the orientation of your camera preview. You can set image properties such as saturation, brightness, contrast for USB and IP Cameras. It allows you to individually configure video properties such as resolution and frame rate for USB cameras. Make the live video clearer by adjusting camera image and video properties. You can change the arrangement and preview layout of the cameras, for your security needs. IP Camera Viewer's centralized camera and layout management allows you to view your cameras from multiple remote locations on a single screen. Get a live preview from multiple cameras with this light-weight application. You can control and view up to 4 camera feeds simultaneously. Virtually all USB cameras work with IP Camera Viewer. You can send a request to our technical team if your camera or model is not listed in our application. It includes Axis, Canon, D-Link, Foscam, Panasonic, Mobotix, Pixord, Sony, Toshiba, Vivotek and many more. Currently more than 2000 different IP camera models from leading camera manufactures are supported. View video from multiple IP cameras directly to your computer. Use any USB or IP camera is to keep an eye on your home, office, parking area or anywhere you need security. Step5: If opened, you can use the WAN IP(external address) and http port to add NVR to the Foscam VMS and view it remotely.Set up an effective video monitoring system within minutes! IP Camera Viewer allows you to view live video from your USB or IP cameras on your PC. Step4: Then go to to check if your NVR http port is opened or not. At last, click 'Apply' button to save above settings. Step2: Go to Basic->IP to disable the DHCP and set up the static IP address and http port for the NVR.Ģ)Then please input the NVR's http port (1818) to the 'External Port Range' box and 'Internal Port Range' box, then input the NVR's IP address (192.168.1.4) to the 'Internal IP address'. Step1: Add the NVR to the Foscam VMS and get into the NVR Device Settings.

#Foscam online viewer how to

If you are not familiar with how to do port forwarding, please refer to here. Step5: If opened, you can use the WAN IP(external address) and http port to login your NVR remotely like below: Step4: Then go to check if your NVR http port is opened or not. At last, click 'Apply' button to save above Here we take the Netgear router as the example for port forwarding.ġ)Login the router and go to Advanced Settings->Port Forwarding page to add a Custom Service:Ģ)Then please input the NVR's http port (1818) to the 'External Port Range' boxĪnd 'Internal Port Range' box, then input the NVR's IP address (192.168.1.4) Step3: Please login your router to do the port forwarding for the NVR. Here we set the NVR IP address to 192.168.1.4 and http port to 1818. It is suggested to use the number between 1000 to 65535. Step2: Please go to Settings->Basic Settings->Network to change the Network Type to 'Static IP' and set a proper number(not 80 or 88) as HTTP Port. Step1: Please login the Foscam NVR web page on computer. Overview: This article will introduce the steps to access Foscam NVR remotely with WAN IP and Port from web browser(IE) and Foscam VMS.